In Krefeld, you often encounter exactly the type of garden where standard sizes rarely work well: brickwork on the house, mature hedges, a long transition to the lawn, and the terrace in between, which really only needs shade in the afternoon.
Shade sails for Krefeld brick houses and long gardens
For narrow plots, the sail should not simply be pulled across the entire width. It is often more practical to use an elongated rectangular or trapezoidal shape that shades the table and seating areas while leaving the path to the garden clear. With double-shell brick masonry, it must be clarified before drilling where the tensile forces will actually be absorbed.
Plan realistically for wind from the Lower Rhine
Open locations seem harmless on calm days. However, a large fabric surface develops considerable forces during gusts. Short tensioning distances, solid post foundations, and accessible disassembly are therefore more important than the largest possible overhang.
A post is not a fence post
Lightweight posts, privacy screens, and old pergola parts are not automatically suitable as an anchor point. A shade sail pulls in several directions permanently; the foundation and cross-section must be suitable for this.
Configure custom shade sails directly
If the shaded area and approximate fabric dimensions are already determined, you can put together the shape, material, and equipment without any detours.
HDPE or waterproof polyester for Krefeld?
For pure shading, HDPE is an air- and water-permeable solution. If the area is also to be protected from rain, the UNICOVR shade sail made of PU-coated polyester is an option. The waterproof version requires sufficient tension and a planned slope.
You can find in-depth information in our guide Attachment to house walls and posts.
Evening sun between tall hedges
Tall hedges block wind but cast their own shadow edges in the late afternoon. Therefore, check whether the sail really needs to reach the western side of the table or if the vegetation is already doing part of the work.
First, mark the table or lounge area, doors, and pathways; then follow the actually usable tension points. Only then does the appropriate fabric shape emerge. A rectangle provides a large, cohesive shaded area, while a trapezoid or a straight custom shape may be more sensible for offset points.
Typical areas of application in Krefeld
- long terraced house gardens
- terraces on brick facades
- seating areas between house and lawn
- gastronomic courtyards
On private terraces and in gardens, a clearly defined seating or dining area is usually the focus. In catering, daycare centers, or commercial settings, pathways, multiple users, and often multiple sails are added. In Krefeld, the entire outdoor area is therefore not blanket-covered; instead, we shade the areas that are actually used.
Order UNICOVR shade sails for Krefeld online
With a UNICOVR shade sail, you choose a rectangle, square, triangle, trapezoid, or a straight custom shape and then enter the fabric dimensions. Fittings and tensioning distances are outside the fabric area. Therefore, use the measuring instructions before ordering. Assembly in Krefeld can be done yourself or by a suitable local specialist company.
Configure your UNICOVR shade sail now and see the price immediately